Software Requirements; Quartus Ii System Requirements - Altera DSP Development Kit User Manual

System Requirements
2–2
DSP Development Kit, Stratix II Edition Getting Started User Guide

Software Requirements

You should install the following software before you begin developing
designs for the kit.
■
The Quartus II software version 5.0 or higher. See
Quartus II Software and MegaCore Functions" on page
■
Internet Explorer 4.01 with Service Pack 2 or later to use Quartus II
Help. You need a web browser to register the Quartus II software and
request license files.
■
The software on the DSP Development Kit, Stratix II Edition Version 5.0
CD-ROM. See "Installing the Reference Designs and Lab" on
page 2–6.
■
The MathWorks MATLAB version 7.0.4 and Simulink Version 6.2
DSP system design and modeling tools provided on the MathWorks
MATLAB and Simulink CD-ROM Release 14 with Service Pack 2
(R14SP2). See "Installing The MathWorks MATLAB/Simulink CD-
ROM" on page 2–3.
You need your network identification card (NIC) ID for licensing the
Quartus II software.
1
Your NIC ID is a 12-digit hexadecimal number that
identifies your computer to the computer that serves
Quartus II licenses. Networked (or floating-node) licensing
requires a NIC ID or server host ID. When obtaining a
license file for network licensing, you should use the NIC
ID from the PC that will issue the Quartus II licenses to
distributed users over a network. You can find the NIC ID
for your card by typing ipconfig /all at a command
prompt. Your NIC ID is the number on the physical address
line, minus the dashes.

Quartus II System Requirements

To use the DSP Development Kit, Stratix II Edition with the Quartus II
software provided with the kit, your system must meet the Quartus II
software minimum requirements. Refer to the Quartus II Installation &
Licensing Manual for PCs for system requirements.
Development Kit Version 1.1.0
"Installing the
2–3.
Altera Corporation
May 2005