Siemens SINUMERIK 808D ADVANCED Operating Instructions Manual page 199

30310 ROT_IS_MODULO
- Modulo conversion for rotary axis / spindle
CTEQ
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
1: A modulo conversion is performed on the setpoints for the rotary axis. The
Description:
software limit switches and the working area limitations are inactive; the
traversing range is therefore unlimited in both directions. MD30300
$MA_IS_ROT_AX must be set to "1"
0: No modulo conversion
MD irrelevant for:
MD30300 $MA_IS_ROT_AX = "0" (linear axes)
Related to:
MD30320 $MA_DISPLAY_IS_MODULO
MD30300 $MA_IS_ROT_AX
MD36100 $MA_POS_LIMIT_MINUS
MD36110 $MA_POS_LIMIT_PLUS
SD43430 $SA_WORKAREA_LIMIT_MINUS
SD43420 $SA_WORKAREA_LIMIT_PLUS
Siemens Controls
Parameter Manual
Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
FALSE, FALSE, 0
FALSE, TRUE
FALSE, FALSE, 0
FALSE, TRUE, TRUE
FALSE, FALSE, 0
FALSE, TRUE
FALSE, FALSE, 0
FALSE, TRUE, TRUE,
TRUE
= 1
2.4 Axis-specific machine data
A01, A06, A11, TE3,K3,R2,T1,A3,R1,R2,S1
-
BOOLEAN PowerOn
- 1/1
- 1/1
- 1/1
- 1/1
"Position display is modulo 360°"
"Rotary axis"
"Software limit switch minus"
"Software limit switch plus"
"Working area limitation minus"
"Working area limitation plus"
Machine data
199