Status Indicators - Sharp FO-3800M Operation Manual

When the following indicators light up or blink on the operation panel or the following
displays appear in the display, solve the problem immediately referring to both the
table below and the relevant page.
Indication Indication Indication
Indication Indication
w
Drum replacement
required indicator
s
TD cartridge
replacement
5
indicator
t
Misfeed indicator
SPF misfeed
indicator
"
"CH is blinking in the
display
"
"CH is steadily lit in the
display
"
"P is blinking in the
display
A letter and a number
appear alternately
"
"-1 appears in the
display
A letter and a number
appear
42 42 42 42 42
SUK 05 MACHINE TROUBLE LEO.p65

Status indicators

Status indicators Status indicators Status indicators Status indicators
Cause and remedy Cause and remedy Cause and remedy Cause and remedy Cause and remedy
Steadlily
Replacement of drum cartridge will be needed soon.
lit
Obtain a new cartridge.
Drum cartridge must be replaced. Replace it with a new
Blinking
one. p.31
Replacement of TD cartridge will be needed soon. Obtain
Steadlily
a new cartridge.
lit
TD cartridge must be replaced. Replace it with a new
one. p.29
Blinking
A misfeed has occurred. Remove the misfed paper
Blinking
referring to the description of "Misfeed removal." p.35
An original misfeed has occured in the SPF. Remove the
Blinking
misfed originals referring to the description of "Misfeed in
the SPF." p.38
The TD cartridge is not installed. Check if the cartridge is
installed. p.30
Front cover is open. Close the front cover securely.
Paper tray is empty. Load copy paper. p.12
A misfeed has occurred in the paper tray. Remove the
misfed paper. p. 35
The copier will not function. Turn the power switch off
and then switch it on, and if there is again an error, re-
move the power cord from the outlet, and contact your
authorized Service representative.
A misfeed has occured when using the SPF. Return one
original to the document feeder tray. p.38
Turn the power switch off. Wait 5 seconds approximately.
Turn the power switch on. If the problem still remains,
contact your authorized Service representative.
PROBLEMS
42 18/04/00, 12:26