Table of Contents
Advertisement
ASSEMBLY
TUBE ASSEMBLY
Step 10
(Only for T852/T862) Attach (2) 1/2" x 6-1/4" Eyebolts, and (4) 1/2" Hex Lock Nuts to the Left and
Right Truss Cable Mount Brackets on the Intake and Mid Tube connection (see Figure 10.1) (Do not
tighten the bolts right now). Attach (2) 1/2" x 6-1/4" Eyebolts, and (4) 1/2" Hex Lock Nuts to the Truss
Adjust Mount Brackets (see Figure 10.2). Attach (2) the Quick Links to the both side of discharge end
of the Discharge Tube (see Figure 10.3). Attach (2) the Quick Links to the Left and Right Truss Cable
Mount Brackets on the Intake and Mid Tube connection (see Figure 10.4).
Intake Tube
Mid Tube
Truss Adjust
Mount Bracket
Figure 10.1: Eyebolts to Right and Left
Figure 10.2: Eyebolts to
Truss Cable Mount Brackets
Truss Adjust Mount Bracket
*Drive Shaft not shown for clarity
Discharge End
Discharge Tube
Mid Tube
Figure 10.3: Quick Links to Right and Left
Figure 10.4: Quick Links to Discharge End
Truss Cable Mount Brackets
*Drive Shaft not shown for clarity
*Drive Shaft not shown for clarity
B7
1300060439-39-00
Advertisement
Table of Contents
