HARVEST T8 SERIES Assembly And Parts Manual page 21

Step 27
Locate the Strap Lid (PN 1300011244-00) and Stop Transport (PN 1300011422-00). Place the Strap
Lid on the Hopper Assembly and secure it with the (2) 1/4" x 2-1/8" Lynch Pins (see Figure 27.1).
Attach the Stop Transport to the tabs on the Hopper Assembly with (1) 1/2" x 3-1/2" Hex Bolt and (1)
Stover Lock Nut (see Figure 27.2). Connect the other end of the Stop Transport to the tabs on the
Tube Connection Hopper with (1) 1/2" x 3-1/2" Clevis Pin c/w (1) Cotter Pin and (1) 1/2" x 5" Pin Bent
c/w (1) Hairpin (see Figure 27.2). Fasteners can be found in bolt bag PN 1300060062-00.
Lynch Pin
Figure 27.1: Strap Lid
Step 28
Locate the Hitch (PN 1300030987-00) and bolt bag PN 1300060067-00. Slide the Hitch into the
Hopper Assembly slide channels and secure it with (2) 1/2" x 5" Pins and (2) Hairpins (see Figure
28.1).
Hopper Assembly
Hitch
ASSEMBLY
HOPPER OPTION
Stop Transport
Strap Lid
Hairpin
Cotter Pin
Tab
Figure 28.1: Hitch
B17
1300060439-48-00
Tab
Clevis Pin
Figure 27.2: Stop Transport
Pin Bent