HARVEST T8 SERIES Assembly And Parts Manual page 33

Step 46
Locate the Gearbox (PN 1300030176-00), Gearbox Mount (PN 1300032048-00), Band Clamp (PN
1300013280-00), and bolt bag PN 1300060231-00. Mount the Gearbox onto the Gearbox Mount
Bracket with (4) 1/2" X 1" Hex Bolts and (4) 1/2" Lock Washers (see Figure 46.1) (Orient the
gearbox so the longer spline shaft stays in right side of the Gearbox Mount). Place the Gearbox
Assembly on the Intake Tube and attach the Band Clamp at the bottom of the Gearbox Mount with (4)
3/8" x 2" Flange Lock Bolts and (4) 3/8" Nylon Lock Nuts (see Figure 46.2). Do not tighten the bolts,
Gearbox Assembly might need to move a bit to connect the gearbox with the Drive Shaft. Location of
the Gearbox Mount and Band Clamp varies for the different size of augers, for the approximate
location see Figures 46.3.
Spline Shaft
Gearbox
Figure 46.1: Gearbox and Gearbox Mount
Gearbox Mount
PTO DRIVE OPTION
Shorter
Longer
Spline Shaft
Gearbox Mount
Figure 46.3: PTO Drive Gearbox Mount Location
ASSEMBLY
Gearbox Assembly
Band Clamp
Figure 46.2: Band Clamp
T832: 2'10"
T836: 2'4"
T842: 2'10"
T852: 3'7"
T862: 11'3"
B29
1300060439-60-00
Main Frame
Mount Bracket