HARVEST T8 SERIES Assembly And Parts Manual page 42

Step 61
Mount Frame Motor Mount Assembly to the Motor Mount Clamps with (8) 3/8" x 1-1/4" Flange Lock
Bolts and (8) 3/8" Flange Lock Nuts (see Figure 61.1). Tighten the bolts on Motor Mount Clamps.
Fasteners can be found in bolt bag (for T832/T842/T852: PN 1300060254-00/for T836: PN
1300060282-00/for T862: 1300060254-00).
Step 62
Locate the Belt Guard Mount Bracket (PN 1300010817-00). Attach the Belt Guard Mount Bracket to
the Frame Motor Mount with (2) 3/8" x 1" Carriage Bolts and (2) 3/8" Flange Lock Nuts (see Figure
62.1). Mount the Electric Motor at the bottom of the Frame Motor Mount on the Motor Slide Brackets
with fasteners supplied with the Electric Motor (see Figure 62.2) (Electric Motor and Lower Pulley are
not supplied with the augur and must be purchased separately. They are just shown for clarity).
Fasteners can be found in bolt bag (for T832/T842/T852: PN 1300060254-00/for T836: PN
1300060282-00/for T862: 1300060254-00).
Frame Motor
Mount Bracket
Belt Guard
Mount Bracket
Figure 62.1: Belt Guard Motor Mount Bracket
ELECTRIC DRIVE OPTION
Figure 61.1: Frame Motor Mount Assembly to
Motor Mount Clamps
ASSEMBLY
Frame Motor
Mount
Electric Motor
Lower Pulley
Figure 62.2: Electric Motor and Lower Pulley
B38
1300060439-68-00
Motor Mount Clamp
Frame Motor
Mount Assembly