HARVEST T8 SERIES Assembly And Parts Manual page 43

Step 63
Locate the Belt Guard Mount (PN 1300010818-00). Attach the Belt Guard Mount to the gearbox with
(4) 5/16" x 1/2" Hex Bolts and (4) 5/16" Lock Washers (see Figure 63.1). Fasteners can be found in
bolt bag (for T832/T842/T852: PN 1300060254-00/for T836: PN 1300060282-00/for T862:
1300060254-00).
Belt Guard Mount
Step 64
Locate the Belt Guard Inner (for T1032/T1036/T1042/T1052: PN 1300030629-00/for T1062: PN
1300031025-00). Install the Belt Guard Inner onto the Belt Guard Mount Bracket and Belt Guard
Mount with (6) 5/16" x 3/4" Flange Lock Bolts and (6) 5/16" Flange Lock Nuts (see Figure 64.1).
Fasteners can be found in bolt bag (for T832/T842/T852: PN 1300060254-00/for T836: PN
1300060282-00/for T862: 1300060254-00).
Belt Guard Inner
ELECTRIC DRIVE OPTION
Figure 63.1: Belt Guard Mount
*Frame Motor Mount Assembly not shown for clarity
Figure 64.1: Belt Guard Inner
ASSEMBLY
B39
1300060439-69-00
Gearbox