HARVEST T8 SERIES Assembly And Parts Manual page 46

Step 69
Locate the Cover Chain Coupler (PN 1300012529-00). Place the Cover Chain Coupler onto the
gearbox and secure it with (4) 1/2" X 1" Hex Bolts and (4) 1/2" Lock Washers (see Figure 69.1)
Fasteners can be found in bolt bag PN 1300060231-00.
Step 70
Locate the Guards Drive Shaft Long (PN 1300010942-00). Start from the top end of discharge tube,
place the Guards Drive Shaft Long onto the bearing Mount brackets on the tubes. Overlap the lower
guard with the top guard and secure them with (for T832/T836: (12) #12 x 3/4" Self Tapping
Screws/for T842: (18) #12 x 3/4" Self Tapping Screws/for T852: (24) #12 x 3/4" Self Tapping
Screws/for T862 PTO Drive Option: (34) #12 x 3/4" Self Tapping Screws/for T862 Electric Drive
Option: (24) #12 x 3/4" Self Tapping Screws) (see Figure 70.1).
Lower Guard
Drive Shaft Long
ASSEMBLY
GUARD ASSEMBLY
Figure 69.1: Cover Chain Coupler
Top Guard
Drive Shaft Long
Figure 70.1: Guard Drive Shaft Long
1300060439-72-00
Cover Chain
Coupler
Bearing Mount
Bracket
B42
Gearbox