HARVEST T8 SERIES Assembly And Parts Manual page 38

Step 54
Locate the Gearbox (PN 1300030176-00), Gearbox Mount (PN 1300032048-00), Band Clamp (PN
1300013280-00), and bolt bag PN 1300060231-00. Mount the Gearbox onto the Gearbox Mount
Bracket with (4) 1/2" X 1" Hex Bolts and (4) 1/2" Lock Washers (see Figure 54.1) (Orient the
gearbox so the shorter spline shaft stays in left side of the Gearbox Mount). Place the Gearbox
Assembly on the Intake Tube and attach the Band Clamp at the bottom of the Gearbox Mount with (4)
3/8" x 2" Flange Lock Bolts and (4) 3/8" Nylon Lock Nuts (see Figure 54.2). Do not tighten the bolts,
Gearbox Assembly might need to move a bit to connect the gearbox with the Drive Shaft. Location of
the Gearbox Mount and Band Clamp varies for the different size of augers, for the approximate
location see Figures 54.3.
Spline Shaft
Shorter
Spline Shaft
Figure 54.1: Gearbox and Gearbox Mount
Main Frame
Mount Bracket
ELECTRIC DRIVE OPTION
Longer
Gearbox
Gearbox
Mount
Figure 54.3: Electric Drive Gearbox Mount Location
ASSEMBLY
Gearbox
Assembly
Band Clamp
Figure 54.2: Band Clamp
T832: 10"
T836: 1"
T842: 2'6"
T852: 1'10"
T862: 1"
B34
1300060439-82-00
Gearbox Mount