HARVEST T8 SERIES Assembly And Parts Manual page 39

Step 55
(Only for T832) Remove the (2) Flangettes, (1) 1" Bore Bearing, (2) 5/16" x 1" Carriage Bolts, and (2)
5/16" Flange Lock Nuts from the Discharge Tube Bearing mount bracket (see Figure 55.1).
Step 56
(Only for T836/T862) Locate the Flangettes (PN 1300010656-00), 1" Bore Bearing (PN
1300010670-00), Drive Shaft Electric (for T836: PN 1300011825-00/for T862: PN 1300011997-00),
and Coupler Drive Shaft (PN 1300010951-00). Mount the Flangettes and 1" Bore Bearing on the Top
Bearing mount bracket onto the Intake Tube with (2) 5/16" x 1" Carriage Bolts and (2) 5/16" Flange
Lock Nuts (see Figure 56.1). Insert the Drive Shaft Electric through the Bearings on Bearing Mount
Brackets on Intake Tube and (for T836: Discharge Tube/for T862: Mid Tube), Connect the Drive Shaft
Electric with the (for T836: Drive Shaft Discharge/for T862: Drive Shaft Mid) using the Coupler Drive
Shaft, (2) 3/8" x 2" Flange Lock Bolts and (2) 3/8" Flange Lock Nuts (see Figure 56.2). Fasteners can
be found in bolt bags (for T836: PN 1300060171-00 and PN 1300060256-00/for T862: PN
1300060269-00 and PN 1300060270-00).
Bearing Mount Barcket
1" Bore Bearing
Flangette
Intake Tube
Figure 56.1: Flangettes and Bearing
ELECTRIC DRIVE OPTION
Bearing Mount Bracket
1" Bore Bearing
Flangette
Intake Tube
Figure 55.1: Removal of Flangettes and Bearing
ASSEMBLY
Coupler
Drive Shaft
Drive Shaft
Electric
Figure 56.2: Drive Shaft Electric and
Coupler Drive Shaft
B35
1300060439-65-00
Discharge Tube
Drive Shaft
Mid or Discharge
Mid or Discharge
Tube
Intake Tube