HARVEST T8 SERIES Assembly And Parts Manual page 44

Step 65
Locate the Upper Pulley (PN 18345-00) and Hub (PN 1300010358-00). Place the Upper Pulley on the
gearbox drive shaft. Slide the Hub on the gearbox drive shaft and secure the hub with the pulley using
(2) 1/4" x 3/4" Hex Bolts and (2) 1/4" Lock Washers (see Figure 65.1). Fasteners can be found in bolt
bag (for T832/T842/T852: PN 1300060254-00/for T836: PN 1300060282-00/for T862:
1300060254-00).
Step 66
Locate the Drive Belt (for T1032/T1036/T1042/T1052: PN 1300012963-00/for T1062: PN
1300012965-00). Place the Drive Belt around the Upper pulley and pull it down to the Lower Pulley
(see Figure 66.1). Tighten the Drive Belt by tightening the nuts on the threaded rods.
ELECTRIC DRIVE OPTION
Figure 65.1: Hub and Pulley
*Main Frame Assembly not shown for clarity
Lower Pulley
Figure 66.1: Drive Belt
*Main Frame Assembly not shown for clarity
ASSEMBLY
Drive Belt
B40
1300060439-70-00
Upper Pulley
Hub
Upper
Pulley