Step 3; Tube & Flighting Assembly - HARVEST H1364XT Assembly Manual

Step 2
(Tube & Flighting Assembly)
Place tubes on assembly stands as shown. Place stands 12" or less from the end of the tube. Placing stands
further than 12" from end of the tube may cause damage to the tubes.

Step 3

Slide the flighting together from the 1
lock nuts. Align flighting as shown to make continuous. After connecting the flighting, slide the 1
together putting in (10) 1/2" x 1-1/2" flange bolts & nuts.
Step 4
rd
Place the 3 tube in front of the 2
flighting using (3) 5/8" x 3" hex bolts and top lock nuts. Connect the tubes using (10) 1/2" x 1-1/2" hex flange
bolts and flange nuts. If assembling an H1364XT please skip to Step 6.
H13XT Assembly Manual
Fig. 2.1
st nd
& 2 tube. Connect the flighting using (3) 5/8" x 3" hex bolts and top
Fig. 3.1
nd
tube and connect the flighting & tubes as shown in Step 3. Connect the
Fig. 4.1
st nd
& 2 tube
Page 5 of 33