HARVEST T8 SERIES Assembly And Parts Manual page 41

Step 59
Locate the Motor Mount Clamps (PN1300030613-00) and bolt bag (for T832/T842/T852: PN
1300060254-00/for T836: PN 1300060282-00/for T862: 1300060254-00). Mount the Motor Mount
Clamps onto the Tube and secure them with (12) 3/8" x 2" Hex Bolts and (12) 3/8" Nylon Lock Nuts
(see Figure 59.1) (Do not tighten the bolts yet). Place the Motor Mount Bracket at (for
T832/T836/T842/T852: 35.5"/for T862: 32") an approximate distance from the Gearbox Mount and
Band Clamp (see Figure 59.2).
Figure 59.1: Motor Mount Clamps
Step 60
Locate the Frame Motor Mount (PN 1300030612-00), Motor Slide Brackets (PN 1300010628-00),
Motor Mount Adjust Shafts (PN 1300010631-00), and Threaded Rods (PN 100790). Place the Motor
Slide Brackets into the Frame Motor Mount and insert the Motor Mount Adjust Shafts through the
holes in Frame Motor Mount and Motor Slide Brackets (see Figure 59.1). Attach (4) Roll Pins to the
ends of the Motor Mount Adjust Shafts (see Figure 60.1). Attach the (2) 5/8" Threaded Rods to the
Frame Motor Mount and Motor Slide Bracket with (6) 5/8" Flange Lock Nuts (see Figure 60.2) (Do
not tighten the nuts). Fasteners can be found in bolt bag (for T832/T842/T852: PN
1300060254-00/for T836: PN 1300060282-00/for T862: 1300060254-00).
Figure 60.1: Motor Slide Brackets
and Motor Mount Adjust Shaft
ELECTRIC DRIVE OPTION
Motor Mount
Clamps
Motor Slide
Brackets
Motor Mount
Adjust Shaft
Frame Motor
Mount
ASSEMBLY
Motor Mount
Gearbox
Clamp
Mount
35.5" or 32"
Figure 59.2: Motor Mount Clamp Location on the Tube
Threaded Rods
Motor Slide
Bracket
Figure 60.2: Threaded Rod
B37
1300060439-67-00
Frame Motor
Mount