HARVEST T8 SERIES Assembly And Parts Manual page 45

Step 67
Locate the Belt Guard End Short (PN 1300010821-00) and Belt Guard End Long (PN
1300010820-00). Attach the Belt Guard End Short to the Belt Guard Inner with (2) 5/16" x 3/4" Flange
Lock Bolts and (2) 5/16" Flange Lock Nuts (see Figure 67.1). Attach the Belt Guard End Long to the
Belt Guard Inner with (2) 5/16" x 3/4" Flange Lock Bolts and (2) 5/16" Flange Lock Nuts (see Figure
67.2). Fasteners can be found in bolt bag (for T832/T842/T852: PN 1300060254-00/for T836: PN
1300060282-00/for T862: 1300060254-00).
Belt Guard
End Short
Belt Guard Inner
Figure 67.1: Belt Guard End Short
Step 68
Locate the Belt Guard Outer (for T1032/T1036/T1042/T1052: PN 1300010816-00/for T1062: PN
1300011822-00). Install the Belt Guard Outer onto the Belt Guard Inner by aligning the slots on Belt
Guard Outer with the welded bolts on the Belt Guard Inner. Secure the Belt Guard Outer with (6)
5/16" Flange Lock Nuts (see Figure 68.1). Fasteners can be found in bolt bag (for T832/T842/T852:
PN 1300060254-00/for T836: PN 1300060282-00/for T862: 1300060254-00).
ELECTRIC DRIVE OPTION
Figure 68.1: Belt Guard Outer
*Main Frame Assembly not shown for clarity
ASSEMBLY
Belt Guard
Inner
Figure 67.2: Belt Guard End Long
Belt Guard Outer
B41
1300060439-71-00
Belt Guard
End Long