HARVEST T8 SERIES Assembly And Parts Manual page 30

ASSEMBLY
FRAME ASSEMBLY
Step 41
Lift the Main Frame Arms and attach it to the Main Frame Arms Mount Bracket welded on bottom of
the Intake Tube with (2) 3/4" x 1-1/2" Hex Bolts and (2) 3/4" Stover Lock Nuts (see Figure 32.1). Do
not overtighten nuts as the Main Frame Arms need to be able to rotate about the bolts. The augur
should now be up on the Frame Assembly. Fasteners can be found in bolt bag (for T832: PN
1300060175-00/for T836/T842: PN 1300060111-00). (for T852/T862: remove the nuts of Arms
Anti-Twist connection. Attach the Main Frame Arms to the Main Frame Arms Mount Bracket,
replace the nuts on the bolts and tighten them.)
Intake Tube
Main Frame Arm
Main Frame Arm Mount Bracket
Figure 41.1: Main Frame Arms to Intake Tube
Step 42
Locate the Manual Holder (for T832/T852/T862: PN 13000004031-00/for T836/T842: PN
13000003861-00). Mount the Manual Holder onto the Left A-Frame Arm and secure it with (for
T832/T852/T862: (2) Zip-Tie and (1) 1/4" x 5/8" Self-Tapping Screw/for T836/T842: (2) 1/4" x 5/8"
Self-Tapping Screws) (see Figures 42.1 & 42.2). Fasteners can be found in bolt bag (for T832: PN
1300060175-00/for T836/T842: PN 1300060111-00/for T852/T862: PN 1300060205-00).
Manual Holder
Manual Holder
Left A-Frame
Arm
Zip-Tie
Left A-Frame Arm
Figure 42.1: Manual Holder
Figure 42.2: Manual Holder
T832/T852/T862 T836/T842
B26
1300060439-57-00