HARVEST T8 SERIES Assembly And Parts Manual page 19

Step 23
Locate the Stub Transition Hopper (PN 1300012615-00). Insert the Stub Transition Hopper into the
Intake Flight and secure it with (1) 1/2" x 3" Hex Bolt and (1) 1/2" Stover Lock Nut (see Figure 23.1).
Fasteners can be found in bolt bag PN 1300060250-00.
Stub Transition
Step 24
Locate the Hopper Clamp (PN 1300030912-00). Slide the Hopper Clamp onto the Intake Tube and
align the slot in the bottom of the Hopper Clamp with key stock welded to the bottom of the Intake
Tube (see Figure 24.1), secure it with (4) 3/8" x 1-1/2" Flange Lock Bolts and (4) 3/8" Flange Lock
Nuts (see Figure 24.2) (Do not tighten the nuts yet). Fasteners can be found in bolt bag PN
1300060251-00.
Key Welded
Figure 24.1: Hopper Clamp Alignment
HOPPER OPTION
Intake Flight
Hopper
Figure 23.1: Stub Transition Hopper
Hopper Clamp
Intake Tube
ASSEMBLY
Intake Tube
Figure 24.2: Hopper Clamp
B15
1300060439-46-00
Hopper Clamp