HARVEST T8 SERIES Assembly And Parts Manual page 40

Step 57
Locate the Hub & Sprocket (PN 1300031686-00) and Sprocket (PN 1300031685-00). Mount the
Sprocket to the end of the Drive Shaft with (1) 3/8" x 2-1/4" Flange Lock Bolt and (1) 3/8" Flange Lock
Nut (see Figure 57.1). Slide the Hub & Sprocket onto the Longer spline shaft of gearbox (see Figure
57.2). Fasteners can be found in bolt bag PN 1300060231-00.
Drive Shaft
Sprocket
Figure 57.1: Sprocket
Step 58
Locate the chain (PN 1300012513-00). Slide the Gearbox Assembly close to the Sprocket on the
Drive Shaft, align the Longer Spline Shaft of the gerbox with the Drive Shaft. Install the chain on the
Hub & Sprocket and Sprocket, connect the both ends of the chain with the Link Connector (see
Figure 58.1). Tighten the bolts on the Gearbox Mount and Band Clamp.
Assembly
ELECTRIC DRIVE OPTION
Link Connector
Gearbox
ASSEMBLY
Shorter
Spline Shaft
Figure 57.2: Gearbox and Hub & Sprocket
*Gearbox Mount and Band Clamp not shown for clarity
Chain
Figure 58.1: Chain
B36
1300060439-66-00
Hub &
Sprocket
Longer
Spline Shaft
Gearbox
Drive Shaft