HARVEST T8 SERIES Assembly And Parts Manual page 37

Step 52
Locate the PTO Support (PN 1300030609-00). Mount PTO Support to the Mount Bracket on the
Intake Tube with (2) 3/8" x 1" Flange Lock Bolts and (2) Flange Lock Nuts (see Figure 52.1).
Fasteners can be found in bolt bag (for T832: PN 1300060165-00/for T836: PN 1300060283-00/for
T842/T852: PN 1300060246-00/for T862: PN 1300060267-00).
Step 53
Locate the PTO Shaft PN 1300030632-00. Install the PTO Shaft onto the gearbox. To install, pull the
collar back on the PTO shaft and slide it onto the gearbox shaft. Release the collar to lock the PTO
Shaft in place. Rest the other end of the PTO Shaft on the PTO Support Bracket. Secure the PTO
Shaft into the bracket by using (1) 1/2" x 5 Pin Bent and (1) Hairpin (see Figure 53.1). Fasteners can
be found in bolt bag (for T832: PN 1300060165-00/for T836: PN 1300060283-00/for T842/T852: PN
1300060246-00/for T862: PN 1300060267-00).
PTO DRIVE OPTION
Intake Tube
Figure 52.1: PTO Support
Figure 53.1: PTO Shaft
*Main Frame and Winch Assemblies not shown for clarity
ASSEMBLY
Mount Bracket
PTO Shaft
B33
1300060439-64-00
PTO Support
Pin Bent
Hairpin