HARVEST T8 SERIES Assembly And Parts Manual page 31

WINCH AND WINCH CABLE ASSEMBLY
Step 43
Locate the winch (PN 1300030108-00) and bolt bag (for T832: PN 1300060171-00/for T836: PN
1300060171-00/for T842: PN 1300060172-00/for T852: PN 1300060259-00/for T862: PN
1300060269-00). Mount the winch onto the winch mount bracket welded at bottom of the Intake Tube
with (3) 3/8" x 1" Flange Lock Bolts and (3) 3/8" Flange Lock Nuts (see Figure 43.1).
Step 44
(Only for T832 Electric Drive Option) Remove the Track Angle Short and Cable Guide located at
the bottom of the Discharge Tube (see Figure 44.1). Mount back the Cable Guide to the end of Track
Angle Long with (2) 3/8" x 1" Flange Lock Bolts and (2) 3/8" Flange Lock Nuts (see Figure 44.2).
Discharge Tube
Cable Guide
Figure 44.1: Removal of Track Angle Short
and Cable Guide
ASSEMBLY
Figure 43.1: Winch
Track Angle Short
1300060439-58-00
Intake Tube
Winch Mount Bracket
Winch
Discharge Tube
Track
Angle Long
Figure 44.2: Mounting back Cable Guide
B27
Track
Angle Long
Stop Track
Cable Guide