HARVEST T8 SERIES Assembly And Parts Manual page 15

Step 15
Slide the Fork Housing assembly over the Intake tube and flighting. Align the Fork Bearing Stub with
the Fork Bushing. Slide the Fork Bearing Stub into the Fork Bushing and align the slot in the bottom
of the Fork housing with key stock welded to the bottom of the Intake Tube (see Figure 15.1). Secure
the Fork Housing assembly on the Intake Tube with (4) 3/8" x 1-1/4" Hex Bolts and (4) 3/8" Flange
Lock Nuts (see Figure 15.2). Fasteners can be found in bolt bag PN 1300060266-00.
Welded Key
Figure 15.1: Welded Key Alignment
Step 16
Locate the Hitch (PN 1300030891-00). Slide the Hitch into the Fork Housing Assembly slide channels
and secure it with (2) 1/2" x 5" Pins and (2) Hairpins (see Figure 16.1). Fasteners can be found in bolt
bag PN 1300060266-00.
ASSEMBLY
FORK OPTION
Fork Housing
Assembly
Hitch
Figure 13.1: Hitch
1300060439-42-00
Intake Tube
Fork Housing
Assembly
Figure 15.2: Fork Housing Assmebly on Intake Tube
Fork Housing Assembly
B11