HARVEST T8 SERIES Assembly And Parts Manual page 27

Step 35
Locate the Housing Trolley and Trolley Roller. Attach the Housing Trolley and Trolley Roller to
A-Frame Arms with (1) (for T832/T836/T842/T852: 3/4" x 6-1/2" Hex Bolt/for T862: 1" x 8" Hex Bolt),
(2) (for T832/T836/T842/T852: 3/4" Flat Washers/for T862: 1" Flat Washers), and (1) (for
T832/T836/T842/T852: 3/4" Stover Lock Nut/for T862: 1" Stover Lock Nut) (see Figure 35.1).
Fasteners can be found in bolt bag (for T832: PN 1300060175-00/for T836/T842: PN
1300060111-00/for T852: PN 1300060204-00/for T862: PN 1300060225-00).
A-Frame Arm
Step 36
(Only for T832/T836/T842) Locate the Stop Track (PN 1300010959-00) and bolt bag PN
1300060256-00. Attach the Stop Track at the bottom of the Track Angle Long on the Discharge Tube
with (2) 3/8" x 1" Hex Bolts and (2) 3/8" Flange Lock Nuts (see Figure 36.1).
Track Angle Short
ASSEMBLY
FRAME ASSEMBLY
Figure 35.1: Housing Trolley and Trolley Roller
Discharge Tube
Figure 36.1: Stop Track
Trolley Roller
Housing Trolley
A-Frame Arm
Track Angle Long
Stop Track
B23
1300060439-54-00