Fluke 4322 Operator's Manual page 50

4322
Operators Manual
Item
Remote

Calibration

2-18
Table 2-1. Settings Menu (cont.)
Tab
Contains remote operation configuration settings.
Print Test Page – Send a test page to the connected printer to test the
connectivity.
IEEE-488 – Set the IEEE address.
Contains Controller calibration settings and information.
View/Edit Calibration – View or edit the calibration coefficients. See the 4322
Service Manual for calibration information and procedures.
Run Calibration – Opens a Calibration menu with tools to calibrate the
Controller. See Chapter 7 or the 4322 Service Manual for calibration information
and procedures.
Past Results – View past calibration results.
Calibration Settings – Set a custom calibration tolerance and apply it to a
module. See Chapter 7.
BaroCheck – See "AutoZero and BaroCheck" in Chapter 3.
Function