Fluke 4322 Operator's Manual page 22

4322
Operators Manual
Item





Item Display Item
Target Pressure

Jog Step

Measurement

Indicator
Pressure Control
Mode

Measurement

Mode
Measured

Pressure
Unit of Measure

Continuity Leads

and Jacks
1-12
Table 1-5. Handheld Control Keys and Functions (cont.)
Key Function: Menu
Key Navigation and Test
Configuration
Select
No functionality.
Cancels the current action and
closes the active menu.
No functionality.
Turn to cycle through the
on-screen fields.
Push to open the selected
menu or set the selected value
in the highlighted field.
Shows the current target pressure value.
Shows the Jog Step setting. The two Jog Step settings are Coarse and Fine.
Refer to "Jog Step Pressure Up or Down" in Chapter 3.
Shows the measurement indicator. See "Measurement Indicators" in Chapter 3.
Shows the active control mode. The indications are Dynamic and Static.
When pressure control is active, the indictors are animated. See "Pressure
Control Modes" in Chapter 3.
Shows the active measurement mode. See "Measurement Modes" in
Chapter 3.
Shows the current applied pressure to the UUT.
Shows the unit of measure.
Positive (red) and negative (black) leads and jacks to connect the accessory
continuity leads.
Key Function: Test in Progress
Opens the selected menu or set the
selected value in the highlighted field.
Aborts (stops) the test and quickly vents the
applied pressure to atmosphere.
Stops pressure control and pauses the test.
To continue the test, push ESC again.
Advance to the subsequent test step or
pressure point.
Turn to increase or decrease the applied
pressure. The faster the dial is turned, the
faster the pressure changes.
Push to set the numerical entry value in the
highlighted field.
Description