Page 2
Networks warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke Networks does not warrant that software will be error free or operate without interruption.
Overview of Features Registration The TS120 Test Telephone is a portable handset used by Registering your product with Fluke Networks gives installers, repair technicians and other authorized you access to valuable information on product updates, personnel for testing of telephone lines and for troubleshooting tips, and other support services.
TS120 Test Telephone Users Guide Safety Information Physical Characteristics The following IEC symbols are used either on the test See Figure 1. set or in the manual: The TS120 housing is made of high-impact plastic. The unit is designed to provide rugged service and Warning: Risk of personal injury.
Physical Characteristics Mode Controls MUTE: Pressing the MUTE key shuts off the TS120 transmitter for as long as the key remains depressed. See Figure 2. POLAR: When an off-hook unit is connected to a The TALK/MONITOR switch is on the inside of the hand powered telephone line, pressing the POLAR key grip near the transmitter.
TS120 Test Telephone Users Guide Line Cord Dialing See Figure 4. Note If tone dialing is selected, the tones associated The TS120 comes with a line cord for connecting the with each digit will be generated as its test telephone to telephone lines. This line cord consists respective key is pressed.
The line cord can be replaced by the user. To replace performed by an authorized service the line cord refer to the instructions that come with technician. the replacement line cord. To obtain a replacement line cord contact your local distributor or Fluke Networks and order part number P3218636.
TS120 Test Telephone Users Guide Specifications Ringer Equivalent 0.14 (REN) Electrical Flash Duration 300 ms ±30 ms >14 dB (ref 600 Ω) Return Loss Physical Line Current Range 15 mA to 120 mA Measurements 10.25 in x 2.88 in x 3.38 in 275 Ω...