Fluke 4322 Operator's Manual page 51

2
Setup
Controller Settings
Table 2-1. Settings Menu (cont.)
Item Tab Function
Contains maintenance settings.
Names – The Controller has a UUT library that can store the names of commonly
Internal

used UUT names and UUT manufacturers. This feature allows UUTs to be quickly
loaded into tests when tests are configured.
Hour Meters – Opens a menu that shows the internal piston pump hours
(resettable), how many hours that system has been pressurized(total and since
last calibration), and total amount of hours that Controller has been turned on.
See Chapter 6 for more information and reset instructions.
ID – Set an alpha-numerical identification to identify the Controller. See
"Controller Identification" in Chapter 6.
Event Log – Event log that tracks and records errors and important system
events such as calibrations and overpressures. See "Event Log" in Chapter 6.
Resets – A series of reset functions for maintenance personnel to reset the
Controller settings. See "Reset Controller Settings" in Chapter 6.
2-19