Fluke 4322 Operator's Manual page 26

4322
Operators Manual
Item
Spring-Loaded Case

Latches
Hoses

CPS (orange)

CPS (blue)

CPS Waste Containers

Adapters Kit

Nitrogen Cylinder Fill

Adapter
PTFE Tape

Spares Kit

Regulator Wrench

DMM Holder

Manuals CD

Nitrogen Cylinder

Regulator
Nitrogen Cylinder

1-16
Table 1-7. Accessories (cont.)
Description
Spring-loaded latches that keeps the lid closed and sealed.
System hoses. The Calibrator comes with:
• One Nitrogen Cylinder connection hose (6 ft)
• One system interconnect hose (6 ft)
• One blue UUT test hose (10 ft)
• One orange UUT test hose (10 ft)
Orange and blue Contamination Prevention System (CPS). See
"UUT Cross-Contamination Prevention" in Chapter 2.
Waste container (60 ml) with lid used with the CPS.
QC adapters for the UUT. See Table 1-8.
Adapter used to connect a fill system to the Nitrogen Cylinder.
Tape to use on NPT fittings.
Contains seals, fuses, and additional replacement parts. See
Table 1-9.
Wrench for installation of the Nitrogen Fill Cylinder Adapter and
Regulator.
Foam cutout for a Fluke Digital Multimeter.
CD that contains the 4322 Operators Manual and 4322 Service
Manual.
Pressure regulator that lets you turn on and turn off pressure and
also see the amount of pressure in the Nitrogen Cylinder.
2,000 psig Nitrogen Cylinder. Maximum cylinder pressure is
2,000 psig.
Function
Warning
To prevent injury, do not over pressurize the
Nitrogen Cylinder. Maximum pressure of the
Cylinder is 2,000 psig.