Specifications; General Specifications - Fluke 4322 Operator's Manual

4322
Operators Manual
O-RING,0.05 IN. W X 0.042 IN. ID,VITON,75 DUROMETER,BROWN
O-RING,VITON,1MM W X 14MM ID,90 DURO,BLACK
O-RING,VITON,1MM W X 12MM ID,90 DURO,BLACK
O-RING,VITON,1MM W X 8MM ID,90 DURO,BLACK
O-RING,FLUOROCARBON,SHORE A 75,BLK,AS 568A-014,.489 ID,.070 W,ROHS COMPL.
48547,BUSHING NON-RIBBED
O-RING,CAST URETHANE,90 DURO,003 (0.060 W X 0.056 ID)
O-RING,VITON,2-002,3/64 ID,9/64 OD,3/64 W,DURO 90,BLACK
SEAL ASSEMBLY, HIGH PRESSURE,T61 SEAL /P02 BACKUP RING /FKM O-RING
O-RING,VITON,1MM W X 3.5MM ID,90 DURO,BLACK
4322-5772,DECAL, SPARE PARTS CASE
CASE,ABS,3.875INX2.375INX1.375IN,WITH HANDLE,BLACK
FUSE,5A,250VAC,TIME LAG,5X20MM,CERAMIC
4322-5933,CUT DETAIL, COALESCING FILTERS
FUSE,FUSE,5X20MM,1A,250V,SLOW
4322-5828,WRENCH,INTENSIFIER PISTON
4322-5860,TOOL, PISTON INSERTION, 4322
O-RING,0.05 IN. W X 0.042 IN. ID,VITON,75 DUROMETER,BROWN

Specifications

General Specifications

Power Requirements ............................................ 100 V ac to 240 V ac (-15 %, +10 %), 50 Hz to 60 Hz
Maximum Power Consumption
Controller ............................................................ 110 VA
Intensifier ............................................................ 200 VA
Operating Temperature Range ............................ 0 °C to 50 °C
Storage Temperature Range ................................ -30 °C to 71 °C
Humidity ................................................................. 5 % to 95 %
Vibration ................................................................ Meets MIL-T-28800D
Altitude (operation) ............................................... 2,000 m
Weight
Controller ............................................................ ~12 kg (27 lb)
Intensifier ............................................................ ~14 kg (31 lb)
Accessory Kit with Handheld Control .................. ~12 kg (27 lb)
Nitrogen Cylinder ................................................ ~12 kg (26 lb)
Dimensions
Controller, Intensifier, and Accessory Kit ............ 32.5 cm Height x 30.5 cm Width x 30.5 cm Depth
Nitrogen Cylinder ................................................ 68.5 cm Height x 17.8 cm Diameter (27 in Height x 7 in Diameter)
Remote Communication Interfaces..................... RS-232, USB type B, IEEE-488.2, USB type A (PRINTER port only)
Pressure Range ..................................................... 3.5 kPa (0.5 psi) absolute to 70 MPa (10,000 psi)
Operating Medium ................................................ Dry nitrogen supply, or ambient air compressed by on-board pump.
Warm-up Time ....................................................... 15 minutes from power on, after at least 60 minutes ambient
1-18
Table 1-9. Accessories - Spares Kit (Not Shown)
Description
(13 in Height x 12 in Width x 12 in Depth)
temperature acclimation time within the working temperature range.