Running A Test - AEMC DTR 8510 User Manual

7.5

Running a Test

1. Open the Control Panel and connect to the instrument.
2. Next, select Run Test from the Instrument menu or click on the Run
Test icon
The user can select Test Type, Test Mode, Test Filter, Present Name-
plate values and where the Measurement Record would be stored.
3. Press Start to run the test. The result (Measurement Record) of the
Test will be displayed in the center.
NOTE:
• If the DTR
computer will disable the automatic saving of the Measurement
Record.
• If the Test needs to be cancelled while testing is in progress,
press the TEST button on the instrument or CANCEL button on
the screen.
• If new Test Type, Test Mode, test Filter and/or Present
Nameplate values are selected, the Configuration will be
changed to reflect them in this and the following tests.
4. Press Save to save the Measurement Record in the selected Object
and Test locations, then press Close to close the dialog box.
NOTE: Pressing Save in the dialog box only saves the test to the instru-
ment, NOT the computer. To save the test on the computer, select Save
from the File menu.
Digital Transformer Ratiometer DTR
Shop for AEMC products online at:
on the side or top menu.
Figure 7-10
8510 is in Autosave mode, the connection to the
®
Model 8510
®
ShopAEMC
www. .com 1.877.766.5412
49