AEMC DTR 8510 User Manual page 54

Once the file is open, select Create DataView Report from the File menu
or click on the Create DataView Report icon. A report will appear on the
screen.
NOTE:
• All downloaded files and reports are saved in the default location
of "My Documents" or "Documents" for each user.
• DataView
for instrument control and data analysis/report generation. CP
can download the Measurement Records previously stored in
the DTR
be stored in the *.icp format. Reports can be generated by a
single click on the "icon" or create DataView Report from the
File menu. When a report is created, a database file *.dvb is
automatically created.
• DataView
• DataView
• When a report is created from the CP, a report can be stored. In
the process a *.dvw file is generated.
• DataView
files. A *.dvb file is automatically created when the CP creates a
report from *.icp file.
• When a report is created, a *.dvw file is created. This report can
be directly opened from DataView
NOTE: For more information about using DataView
DataView
®
can also be found online at www.aemc.com on our software download
page for DataView
52
Shop for AEMC products online at:
Figure 7-15
and Control Panel (CP) are fully integrated programs
®
8510 memory. These Measurement Records can
®
can also call the CP or the CP of other instruments.
®
cannot open *.icp files.
®
can also create a report from the available database
®
manual that is included on the installation CD. This manual
.
®
ShopAEMC
www.
.
®
Digital Transformer Ratiometer DTR
, refer to the
®
Model 8510
®
.com 1.877.766.5412