Restoring Factory Defaults - AEMC DTR 8510 User Manual

4.3.9

Restoring Factory Defaults

The factory default settings are shown in the following table:
To set the instrument back to the factory default configuration:
1. Turn the DTR
2. Press and hold the ▲ key.
3. Turn the DTR
4. Release the ▲ key when the instrument beeps.
NOTE: The previously stored Measurement Records will remain in the
memory and the language will remain the same as before the default
configuration was loaded.
Digital Transformer Ratiometer DTR
Shop for AEMC products online at:
Parameter
Test Mode
Test Type
Filter
Storage Mode
Language
Nameplate
Nameplate
Values
Table 4-1
8510 OFF.
®
8510 ON.
®
Model 8510
®
ShopAEMC
www.
Default Value
Ratio
VT/PT
Normal
Manual
English
Disable
19920:7200
19920:4800
19920:2400
19920:2160
19920:120
7200:2400
7200:2160
7200:120
2400:120
2160:120
.com
25
1.877.766.5412