Set Clock - AEMC DTR 8510 User Manual

4.3.1

Set Clock

1. Within the top level of Configure Instrument, press the ▼ or ▲ key
until Set Clock appears on the display, then press ENTER.
The Set Clock configuration allows you to format the following:
Date Format: Allows the formatting of the date.
(MM/DD/YY, DD/MM/YY, YY/MM/DD).
Time Format: Allows the formatting of the time (12 or 24 hours).
Set Date and Time: Allows the setting of the date and time in the selected
format.
Note: Time must be set in the 24-hour format. It will be displayed with AM/
PM if the 12-hour format is chosen.
Example: To set the time to 2:50 PM, set the hour to 14 and the minutes
to 50.
16
Shop for AEMC products online at:
Figure 4-5
Figure 4-6
Figure 4-7
Figure 4-8
Digital Transformer Ratiometer DTR
ShopAEMC
www.
Model 8510
®
.com 1.877.766.5412