7.4
Configuring the DTR
To Configure the DTR
1. Open the Control Panel and connect to the instrument. To open the
Control Panel refer to § 7.2
2. Next, select Configure from the Instrument menu or click on the
Configure icon
played.
Date Format: Allows selection of the Date Format as MM/DD/YY or
DD/MM/YY or YY/MM/DD.
Time format: Allows selection of Time format as 24-hour or 12-hour format.
Default Test Type: Allows selection of VT/PT or CT test.
Default Test Mode: Allows selection of test for Ratio only or Cont/Ratio
(Continuity and Ratio) mode.
Digital Transformer Ratiometer DTR
Shop for AEMC products online at:
8510
®
8510, perform the following steps:
®
. The Configure Instrument dialog box will be dis-
Figure 7-8
Model 8510
®
ShopAEMC
www.
.com
1.877.766.5412
47