Introduction - AEMC DTR 8510 User Manual

These safety warnings are provided to ensure the safety of
personnel and proper operation of the instrument.
• This instrument is protected from accidental voltages of not
more than 50V with respect to earth. The guaranteed level of
protection of this equipment may be compromised if used in a
manner not specified by the manufacturer.
• Read the instruction manual completely and follow all safety
information before attempting to use or service this instrument.
• The Digital Transformer Ratiometer DTR
designed for use on de-energized ("dead") transformers only.
Make sure the test sample is completely disconnected from AC
power and is fully discharged.
• Only qualified personnel should use the DTR
• The DTR
its components (including test cables) are relied upon to provide
protection from electric shock. No high voltage insulation/
protection is provided by any component of the DTR
Always make sure the circuit is fully discharged before
attaching any test cables.
• Do not touch, adjust, or reposition test cables while the DTR
conducting a test.
• Use caution on any apparatus: potentially high voltages and
currents may be present and pose a shock hazard.
• Safety is the responsibility of the user.
• Only use the charging unit supplied with the instrument to
recharge the battery.
• Never open the instrument while it is connected to AC power
or when test cables are connected to transformers, equipment,
circuits, etc.
Digital Transformer Ratiometer DTR
Shop for AEMC products online at:
CHAPTER 1

INTRODUCTION

WARNING
8510 must not be used in a manner in which any of
®
Model 8510
®
ShopAEMC
www.
Model 8510 is
®
8510 .
®
8510.
®
.com 1.877.766.5412
is
®
3