Control Features - AEMC DTR 8510 User Manual

2.2

Control Features

1
2
3
H
4
X
50V CAT IV
1. Display: Displays data, status and control features of the instrument.
2. USB Connector: Allows connection to a computer for instrument
configuration set-up and status check, downloading of the stored
data using the DataView
3. High-side "H" Cable Connector (primary): Connection for the
primary side of the transformer.
4. Low-side "X" Cable Connector (secondary): Connection for the
secondary side of the transformer.
5. Battery Charge Input Connector: Allows the smart charger to
charge the batteries.
6. Power Switch: Turns the instrument ON or OFF (if the charger is not
connected). If the charger is connected, the batteries charge in OFF/
CHARGE position.
7. Operation and Battery Low Indicator: Green LED indicates that
the instrument is on and blinks when the batteries are getting low
(<12V). The instrument will completely shut down when the batteries
are below 8.7V.
8
Shop for AEMC products online at:
USE ONLY ON DE-ENERGIZED TRANSFORMERS
MEM
ENTER
TEST
software and running a test..
®
Digital Transformer Ratiometer DTR
ShopAEMC
www.
USE SPECIFIED
CHARGER ONLY
CONTRAST
DIGITAL TRANSFORMER RATIOMETER
DTR MODEL 8510
®
.com
5
6
OFF/
CHARGE
7
ON
8
9
10
11
Model 8510
®
1.877.766.5412