Landoll 2131 Operator's Manual page 85

3. An adjusting wrench is provided to make this
adjustment. It may be necessary to lower the wing to
the ground and relieve weight on the cylinder anchor
to make this adjustment. If required, fully raise the
implement, lower to just above the ground, and
re-verify measurements. Repeat as necessary and
securely tighten the cylinder anchor when complete.
OPERATION AND MAINTENANCE
BASE END
ADJUSTMENT
WING
FRAME
2130wingliftadj
Figure 4-9: Wing Lift Adjustment
4 X 16 HYDRAULIC
CYLINDER
WHEEL LIFT
WHEEL
ASSEMBLY
4-9