Landoll 2131 Operator's Manual page 81

5. To fold/unfold the 2131 Wing Coulter Chisel, find a
level area large enough to accommodate the
implement when it is fully unfolded. The tractor
should be stopped and not moving with the unit fully
raised. Remove the transport lock pins from the
mounts and install them in the storage locations (See
Figures 4-5 and 4-6.)
IMPORTANT
Failure to remove the lock pins when unfolding will
result in serious damage to the implement. Be sure
other people and pets are a safe distance away.
6. Slowly engage the tractor lever and fold/unfold the
wing frames. When the wings are unfolded, continue
holding the tractor lever to fully extend all fold
cylinders. This will allow the wings to fully flex in the
field.
7. When the unit is fully folded, remove the transport
lock pins from the storage location and install in the
mounts provided on each side of the machine.
OPERATION AND MAINTENANCE
WING STABILIZER
BRACKET
WING LOCK
PIN
1/4 X 3 ROLL
PIN
2130 foldlock1
Figure 4-5: Installed Position of Transport Locks
WING STABILIZER
BRACKET
WING LOCK
PIN
1/4 X 3 ROLL
PIN
2130foldlock2
Figure 4-6: Stored Position of Transport Locks
4-5