Leica Builder T User Manual page 148

Data Management Mode, for
Builder RM, M power and RM power
Description of fields
Field Option
Data Output RS232
Int. Mem.
Baudrate 2400, 4800,
9600, or 19200
Databits
7
8
Parity None, Even or
Odd
Endmark CR/LF
CR
Stopbits 1
Builder
Description
Data is recorded via the serial interface. For
this purpose, a data storage device must be
connected.
All data is recorded in the internal memory.
Frequency of data transfer from receiver to
device in bits per second.
Number of bits in a block of digital data.
Set automatically if <Parity:> Even or Odd.
Set automatically if <Parity:> None.
Error checksum at the end of a block of
digital data.
The terminator is a carriage return followed
by a linefeed.
The terminator is a carriage return.
Number of bits at the end of a block of digital
data.
148