Leica Builder T User Manual page 49

Version 4.0
Table of Contents

Advertisement

Operation
For NiMH batteries:
Charging / first-time use
The battery must be charged prior to using it for the first time because it is deliv-
ered with an energy content as low as possible.
For new batteries or batteries that have been stored for a long time (> three
months), it is effectual to make 3 - 5 charge/discharge cycles.
The permissible temperature range for charging is between 0°C to +35°C/+32°F
to +95°F. For optimal charging we recommend charging the batteries at a low
ambient temperature of +10°C to +20°C/+50°F to +68°F if possible.
It is normal for the battery to become warm during charging. Using the chargers
recommended by Leica Geosystems, it is not possible to charge the battery if the
temperature is too high.
Operation/Discharging
The batteries can be operated from -20°C to +55°C/-4°F to +131°F.
Low operating temperatures reduce the capacity that can be drawn; very high
operating temperatures reduce the service life of the battery.
Builder
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Builder rmBuilder rm powerBuilder m powerBuilder r

Table of Contents