Leica Builder T User Manual page 149

Standard RS232
Set communication
parameters step-
by-step
Data Management Mode, for
Builder RM, M power and RM power
Standard RS232 is supported by default.
Field
Baudrate
Databits
Parity
Endmark
Stopbits
Step Description
Make sure that DATA Mode is active.
1. Press RS232 to access communication parameter setting.
2.
Press to set focus on desired field.
3.
Press to toggle through the settings and select desired field.
4. Accept with OK.
The setting is overtaken.
Option
19200
8
None
CR/LF
1
Builder 149