Leica Builder T User Manual page 162

System Info and Instrument Protection
Deactivate PIN
code step-by-step
Step Description
Now the instrument is protected against unauthorized use. After
switching on the instrument or re-enter in the PIN settings the PIN
code entry is necessary.
Step Description
1.
Turn on the instrument by pressing the
Make sure that THEO mode is active.
2.
Press for approximately 5 seconds.
3. Enter your personal PIN in <PIN-CODE>:.
4. Accept with OK.
5. Deactivate PIN by setting <Use PIN-Code>: Off.
6. Accept with OK.
Now the instrument isn't protected anymore against unauthorized
use.
Builder
key.
162