Leica Builder T User Manual page 83

Combining
MEASURE and
RECORD step-by-
step
Program Mode, for Builder R, RM,
M power and RM power
The key combination of MEASURE and RECORD can be used to measure non acces-
sible points with the prism, for example building corners.
Step Description
Make sure that PROG Mode is active.
Make sure that <Measure&Record: MEAS/REC> is set. Refer to "6
Configuration Mode" for information on how to make the setting.
1. Position the prism at the same distance from the instrument as the
building corner to be measured.
2. Press MEASURE to measure the distance.
3. Press RECORD to store the measured distance to the prism and the angles
to the corner of the house.
Builder 83