Leica Builder T User Manual page 102

Application Programs, for Builder R, RM,
M power and RM power
Description of fields
Field Description
<Pt:> The identifier for the points to be staked.
Available for Builder RM, M power and RM power.
<Line:> Available if a Setup method with Control Line was used.
Longitudinal offset of the start point of the control line in the direc-
tion of the second point of the control line.
Line is positive in the direction from line start point to second line
point.
<Offs:> Available if a Setup method with Control Line was used.
Cross offset to the control line.
Offset is positive at the right hand side of the control line.
<E:> Available if a Setup method with Coordinates was used.
Easting of point to be staked.
<N:> Available if a Setup method with Coordinates was used.
Northing of point to be staked.
<H:> Height of point to be staked.
Builder
102