Leica Builder T User Manual page 140

Data Management Mode, for
Builder RM, M power and RM power
View and select a
job step-by-step
Delete a job step-
by-step
Step Description
Make sure that DATA Mode is active.
1. Press JOB to access job management.
2.
Press to toggle through the jobs and select job.
3. Accept with OK.
The selected job is set as active job.
Step Description
Make sure that DATA Mode is active.
1. Press JOB to access job management.
2.
Press to toggle through the jobs and select job.
3. Press DELETE.
4. Accept with YES.
The selected job is deleted. Data is not recoverable.
Builder
140