Delete a measure-
ment step-by-step
Data Management Mode, for
Builder RM, M power and RM power
Step
Description
Make sure that DATA Mode is active.
1.
Press
to set <Type:> Measurement.
2.
Press
to set focus on <Pt:>.
3.
Press
to toggle through the points and select point.
4.
Press POINTS to access point management.
5.
Press DELETE to delete point.
6.
Accept with YES.
The selected point is deleted. Data is not recoverable.
Deleting measurements is not available for application programs Tie
Distance and Area because of the result calculation.
Builder
145