Table of Contents
Advertisement
Introduction
Description
Telescope Type 1
•
Builder R and RM allow only measurements without prisms.
When using this EDM type a narrow visible red laser beam is
used to measure distances.
Telescope Type 2
•
When measuring distances to a reflector with EDM type "fine"
or "fast" this telescope type uses a wide visible red laser beam,
which emerges coaxially from the telescope's objective. Only
possible with the Builder M power and RM power.
•
Builder RM power can measure distances without prisms.
When using the EDM type "red dot" a narrow visible red laser
beam is used to measure distances.
Builder
5
Advertisement
Table of Contents
