Introduction; Intended Audience; Applicable Products - Omron NJ Series Firmware Update Instruction

Introduction

Thank you for purchasing NJ/NX-series products.
This manual contains information that is necessary to update the firmware of NJ/NX-series products.
Please read this manual and make sure you understand the firmware update before you attempt to
use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.

Applicable Products

This manual covers the following products.
•
NX-series CPU Units
•
NX701-£7££
•
NX701-£6££
•
NX502-15££
•
NX502-14££
•
NX502-13££
•
NX102-12££
•
NX102-11££
•
NX102-10££
•
NX102-90££
•
NX1P2-11££££
•
NX1P2-11££££1
•
NX1P2-10££££
•
NX1P2-10££££1
•
NX1P2-90££££
•
NX1P2-90££££1
•
NX1P2-9B££££
•
NX1P2-9B££££1
NJ/NX-series Firmware Update Instruction with Memory Cards (P161)
•
NJ-series CPU Units
•
NJ501-£5££
•
NJ501-£4££
•
NJ501-£3££
•
NJ301-12££
•
NJ301-11££
•
NJ101-10££
•
NJ101-90££
Introduction
1