Appendix B, Pinouts; B1 Rs232 Connector Pinout; B2 Digital I/O Port Connector - Ametek 7230 Instruction Manual

Pinouts
B.1 RS232 Connector Pinout
B.2 Digital I/O Port Connector
Pin Function
2 RXD
3 TXD
5 GND
7 RTS
All other pins are not connected
8-bit TTL-compatible port. Each bit is configurable as an input or output. If
configured as an output, the bit status can be set, and if configured as an input it can
be read, from the front panel or via the computer interfaces.
When set as an output, each line can drive three LSTTL loads. When set as an input
each input presents one LSTTL load. The connector will mate with a 20-pin IDC
header plug (not supplied). The pinout is as follows:-
Pin Function
1 Ground
2 Ground
3 D0
4 Ground
5 D1
6 Ground
7 D2
8 Ground
9 D3
10 Ground
11 D4
12 Ground
13 D5
14 Ground
15 D6
16 Ground
17 D7
Figure B-1, RS232 Connector (Female)
Description
Data In
Data Out
Signal Ground
Request to Send - always +12 V
Figure B-3, Digital I/O Port Connector
B
Appendix
B-1