Ametek 7230 Instruction Manual page 128

Appendix A, SPECIFICATIONS
Auxiliary Inputs
Outputs
Data Storage Buffer
Interfaces
A-4
ADC 1, 2, 3 and 4
Maximum Input
Resolution
Accuracy
Input Impedance
Sample Rate
Trigger Mode
Trigger Input
Analog Outputs
DAC1
DAC2
DAC3
DAC4
Output Functions
Amplitude
X(1), Y(1), Mag(1), Pha(1)
User DACs and Output Functions
Impedance
Update Rate
X(1/2), Y(1/2), Mag(1/2), Pha(1/2) @ TC < 1 s
User DACs, Output Functions and TC's  1 s
8-bit Digital Port
Mode
Status
Size
Max Storage Rate
Fast Mode
Normal Mode
Built-in web server displays pages containing instrument controls and outputs on any
computer running a compatible browser that is connected to the same Ethernet
network. USB 2.0, Ethernet, and RS232 allow complete control of instrument
settings, and data readout, from other software packages.
±11 V
1 mV
±20 mV
1 M // 30 pF
200 kHz maximum (one ADC only)
Internal, External or burst
TTL compatible, rising or falling edge
X, X1, Mag2, User DAC1, Output function
Y, Y1, Pha2, User DAC2, Output function
X2, Mag, Mag1, User DAC3, Output function
Y2, Pha, Pha2, User DAC4, Output function
Noise, Ratio, Log Ratio and
User Equations 1 & 2.
±2.5 V full-scale; linear to ±300% F.S.
±11.0 V full-scale
1 k
1 MHz
1 kHz
0 to 8 lines can be configured as inputs, with the
remainder being outputs
Each output line can be set high or low and the
status of each input line read
100,000 data points max.
1 MHz (X1, Y1, X2, Y2, ADC1, Demod I/P 1,
Demod I/P 2)
1 kHz