Bfm#352 To #383] Remote Output (Ry) - Mitsubishi FX3U User Manual

FX -16CCL-M User's Manual
3U
10.8

[BFM#352 to #383] Remote Output (RY)

Used when the remote net ver. 1 mode or remote net additional mode is selected.
The output status from remote I/O stations, remote device stations and intelligent device stations are stored.
Each station uses 2 words.
Master station
BFM No.
160H
For station
No. 1
161H
162H
For station
No. 2
163H
164H
For station
No. 3
165H
166H
For station
No. 4
167H
168H
For station
No. 5
169H
to
17DH
17EH
For station
No. 16
17FH
: The last two bits cannot be used in the communication between the master and intelligent device stations.
(In the example above, RY9E and RY9F cannot be used.)
Caution
• When the TO instruction (or direct buffer memory specification) is executed for writing to an area without
assigned link points, writing is invalid.
When the FROM instruction (or direct buffer memory specification) is executed for reading from an area
without assigned link points, the reading operation results in "0" being read.
• The last two bits cannot be used in the communication between the master and intelligent device stations.
• The upper 16bits (1 word) in the last station of remote stations and intelligent device stations is occupied
as a system area. For details, refer to the each unit's manuals.
110
Remote output (RY)
RY F to RY 0
RY 1F to RY 10
RY 2F to RY 20
RY 3F to RY 30
RY 4F to RY 40
RY 5F to RY 50
RY 6F to RY 60
RY 7F to RY 70
RY 8F to RY 80
RY 9D to RY 90
to
RY1DF to RY1D0
RY1EF to RY1E0
RY1FF to RY1F0
10.8 [BFM#352 to #383] Remote Output (RY)
Remote I/O station
(Station No. 1:
Occupies 1 station)
Y0F to Y00
Y1F to Y10
10 Buffer Memory
Remote device station/
Intelligent device station
(Station No. 2:
Occupies 4 stations)
Remote output (RY)
RY F to RY 0
RY 1F to RY 10
RY 2F to RY 20
RY 3F to RY 30
RY 4F to RY 40
RY 5F to RY 50
RY 6F to RY 60
RY 7D to RY 70